|
 | 作者: linux [linuxchen]
 论坛用户 |
登录 |
| www# dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #0: Sat Jan 17 22:33:04 CST 2004 yearcon@www.avfox.com:/usr/src/sys/compile/AVFOX Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2430.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 535756800 (523200K bytes) avail memory = 516935680 (504820K bytes) Preloaded elf kernel "kernel" at 0xc0443000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fc8b0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xea000000-0xea07ffff,0xe0000000-0xe7ffffff irq 12 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xc000-0xc07f mem 0xe9000000-0xe900007f irq 10 at device 0.0 on pci1 xl0: Ethernet address: 00:10:ee:89:77:65 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2940B Ultra2 SCSI adapter> port 0xc400-0xc4ff mem 0xe9001000-0xe9001fff irq 11 at device 2.0 on pci1 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 6 orm0: <Option ROM> at iomem 0xcc000-0xd17ff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 114473MB <ST3120022A> [232581/16/63] at ata0-master UDMA100 ad1: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata0-slave UDMA100 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DNES-309170Y SAG0> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) pid 94 (sendmail), uid 25 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 96 (sendmail), uid 25 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full pid 178 (mysqld), uid 88 on /var: file system full www# |
| 地主 发表时间: 04-03-06 21:49 |
 | 回复: bjhjf007 [bjhjf007] 论坛用户 |
登录 |
|
硬盘够大 |
| B1层 发表时间: 04-03-06 22:21 |
 | 回复: NetDemon [netdemon]  ADMIN |
登录 |
|
3个硬盘共250G 结果 on /var: file system full  |
| B2层 发表时间: 04-03-06 23:47 |
|
20CN网络安全小组版权所有
Copyright © 2000-2010 20CN Security Group. All Rights Reserved.
论坛程序编写：NetDemon
粤ICP备05087286号
论坛: UNIX系统 标题: 我的FreeBSD好厉害的,看看吧