20CN网络安全小组论坛 - 编程破解 - 大哥们帮我破一下CISCO路由器配置的密码

论坛: 编程破解标题: 大哥们帮我破一下CISCO路由器配置的密码

作者: perljava [perljava]

论坛用户

我破了一下，是用solarwinds自带的那个工具，但是都是乱码，所以请大家帮个忙：

begin
!
# ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION *****
!
!
#time: Mon Aug 23 2004, 23:16:57
!
#version 6.1(2)
!
!
#system web interface version(s)
set password $2$Tsp6$3s4g73E.onQLQRM.FKCXw1
set enablepass $2$kdBy$fEb1FN1067VlNLNgyHyfV/
set prompt C4006>
set length 24 default
set logout 20
set banner motd
!
#test
set test diaglevel complete
!
#errordetection
set errordetection inband disable
set errordetection memory disable
!
#system
set system baud 9600
set system modem disable
set system name
set system location
set system contact
set system countrycode
set traffic monitor 100
!
#frame distribution method
set port channel all distribution mac both
!
#mac address reduction
set spantree macreduction disable
!
#default portcost mode
set spantree defaultcostmode short
!
#snmp
set snmp community read-only power2000
set snmp community read-write private
set snmp community read-write-all secret
set snmp rmon disable
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
set snmp trap disable repeater
set snmp trap disable vtp
set snmp trap disable auth
set snmp trap disable ippermit
set snmp trap disable vmps
set snmp trap disable entity
set snmp trap disable config
set snmp trap disable stpx
set snmp trap disable syslog
!
#tacacs+
set tacacs attempts 3
set tacacs directedrequest disable
set tacacs timeout 5
!
#radius
set radius deadtime 0
set radius timeout 5
set radius retransmit 2
!
#kerberos
!
#authentication
set authentication login tacacs disable console
set authentication login tacacs disable telnet
set authentication login tacacs disable http
set authentication enable tacacs disable console
set authentication enable tacacs disable telnet
set authentication enable tacacs disable http
set authentication login radius disable console
set authentication login radius disable telnet
set authentication login radius disable http
set authentication enable radius disable console
set authentication enable radius disable telnet
set authentication enable radius disable http
set authentication login local enable console
set authentication login local enable telnet
set authentication login local enable http
set authentication enable local enable console
set authentication enable local enable telnet
set authentication enable local enable http
set authentication login kerberos disable console
set authentication login kerberos disable telnet
set authentication login kerberos disable http
set authentication enable kerberos disable console
set authentication enable kerberos disable telnet
set authentication enable kerberos disable http
set authentication login attempt 3 console
set authentication login attempt 3 telnet
set authentication login lockout 0 console
set authentication login lockout 0 telnet
set authentication enable attempt 3 console
set authentication enable attempt 3 telnet
set authentication enable lockout 0 console
set authentication enable lockout 0 telnet
!
#vtp
set vtp domain hichina
set vtp mode server
set vtp v2 disable
set vtp pruning disable
set vtp pruneeligible 2-1000
clear vtp pruning 1001-1005
set vlan 1 name default type ethernet mtu 1500 said 100001 state active
set vlan 10 name Hichina_plat type ethernet mtu 1500 said 100010 state active
set vlan 20 name NT_plat type ethernet mtu 1500 said 100020 state active
set vlan 30 name UNIX_plat type ethernet mtu 1500 said 100030 state active
set vlan 99 name dummy_vlan type ethernet mtu 1500 said 100099 state active
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off
set dot1q-all-tagged disable
!
#ip
set feature mdg enable
set interface sc0 1 xxx.xxx.103.2/255.255.255.0 xxx.xxx.103.255

set interface sc0 up
set interface sl0 0.0.0.0 0.0.0.0
set interface sl0 down
set interface me1 0.0.0.0 0.0.0.0 0.0.0.0

set interface me1 down
set arp agingtime 1200
set ip redirect enable
set ip unreachable enable
set ip fragmentation enable
set ip route 0.0.0.0/0.0.0.0 xxx.xxx.103.1
set ip alias default 0.0.0.0
!
#command alias
!
#vmps
set vmps server retry 3
set vmps server reconfirminterval 60
!
#rcp
set rcp username
!
#dns
set ip dns disable
!
#spantree
#uplinkfast groups
set spantree uplinkfast disable
#backbonefast
set spantree backbonefast disable
#portfast
set spantree portfast bpdu-guard disable
#vlan 1003
set spantree enable 1003
set spantree fwddelay 4 1003
set spantree hello 2 1003
set spantree maxage 10 1003
set spantree priority 32768 1003
#vlan 1005
set spantree enable 1005
set spantree fwddelay 4 1005
set spantree hello 2 1005
set spantree maxage 10 1005
set spantree priority 32768 1005
#vlan(defaults)
set spantree enable 1,10,20,30,99
set spantree fwddelay 15 1,10,20,30,99
set spantree hello 2 1,10,20,30,99
set spantree maxage 20 1,10,20,30,99
set spantree priority 32768 1,10,20,30,99
!
#cgmp
set cgmp disable
set cgmp leave disable
!
#syslog
set logging console disable
set logging server disable
set logging level cdp 4 default
set logging level mcast 2 default
set logging level dtp 5 default
set logging level earl 2 default
set logging level ip 2 default
set logging level pruning 2 default
set logging level snmp 2 default
set logging level spantree 2 default
set logging level sys 5 default
set logging level tac 2 default
set logging level tcp 2 default
set logging level telnet 2 default
set logging level tftp 2 default
set logging level vtp 2 default
set logging level kernel 2 default
set logging level filesys 2 default
set logging level pagp 5 default
set logging level mgmt 5 default
set logging level mls 5 default
set logging level protfilt 2 default
set logging level security 2 default
set logging level radius 2 default
set logging level udld 4 default
set logging level gvrp 2 default
set logging level cops 2 default
set logging level qos 3 default
set logging server facility LOCAL7
set logging server severity 4
set logging timestamp enable
set logging buffer 500
set logging history 1
!
#ntp
set ntp broadcastclient disable
set ntp broadcastdelay 3000
set ntp client disable
set ntp authentication disable
clear timezone
set summertime disable
set summertime recurring
!
#set boot command
set boot config-register 0x2
set boot system flash bootflash:cat4000.6-1-2.bin
!
#permit list
set ip permit disable telnet
set ip permit disable ssh
set ip permit disable snmp
!
#permanent arp entries
!
#protocolfilter
set protocolfilter disable
!
#mls
set mls enable
set mls disable ipx
set mls flow destination
set mls nde disable
set mls agingtime 256
set mls agingtime ipx 256
set mls agingtime fast 0 0
set mls nde disable
!
#standby ports
set standbyports disable
!
#vlan mapping
!
#gmrp
set gmrp disable
!
#garp
set garp timer all 200 600 10000
!
#cdp
set cdp interval 60
set cdp holdtime 180
set cdp enable
set cdp version v2
!
#qos
set qos disable
set qos defaultcos 0
set qos map 2q1t 1 1 cos 0-1
set qos map 2q1t 1 1 cos 2-3
set qos map 2q1t 1 1 cos 4-5
set qos map 2q1t 1 1 cos 6-7
!
#mls multicast
set mls multicast disable
!
#udld
set udld disable
set udld interval 15
!
#port channel
set port channel 3/1-2 52
set port channel 1/1-2 77
set port channel 2/1-2 78
set port channel 2/3-6 79
set port channel 3/3-4 80
set port channel 3/5-8 81
set port channel 3/9-12 82
set port channel 3/13-16 83
set port channel 3/17-20 84
set port channel 3/21-24 85
set port channel 3/25-28 86
set port channel 3/29-32 87
set port channel 3/33-34 88
!
#accounting
set accounting exec disable
set accounting connect disable
set accounting system disable
set accounting commands disable
set accounting suppress null-username disable
set accounting update new-info
!
#errdisable timeout
set errdisable-timeout disable other
set errdisable-timeout disable udld
set errdisable-timeout disable duplex-mismatch
set errdisable-timeout disable bpdu-guard
set errdisable-timeout disable channel-misconfig
set errdisable-timeout interval 300
!
#http configuration
set ip http server disable
set ip http port 80
!
#crypto key
!
#module 1 : 2-port 1000BaseX Supervisor
set module name 1
set vlan 1 1/1-2
set port enable 1/1-2
set switchacceleration disable 1
set port level 1/1-2 normal
set port trap 1/1-2 disable
set port name 1/1-2
set port security 1/1-2 disable age 0 maximum 1 shutdown 0 violation shutdown
set port membership 1/1-2 static
set port protocol 1/1-2 ip on
set port protocol 1/1-2 ipx auto
set port protocol 1/1-2 group auto
set port negotiation 1/1-2 enable
set port flowcontrol 1/1-2 send desired
set port flowcontrol 1/1-2 receive off
set cdp enable 1/1-2
set udld enable 1/2
set udld disable 1/1
set udld aggressive-mode disable 1/1-2
set trunk 1/1 auto dot1q 1-1005
set trunk 1/2 auto dot1q 1-1005
set spantree portfast 1/1-2 disable
set spantree portcost 1/1-2 4
set spantree portpri 1/1-2 32
set spantree portvlanpri 1/1 0
set spantree portvlanpri 1/2 0
set spantree portvlancost 1/1 cost 3
set spantree portvlancost 1/2 cost 3
set spantree guard none 1/1-2
set port gvrp 1/1-2 disable
set gvrp registration normal 1/1-2
set gvrp applicant normal 1/1-2
set port gmrp 1/1-2 enable
set gmrp registration normal 1/1-2
set gmrp fwdall disable 1/1-2
set port channel 1/1-2 mode auto silent
!
#module 2 : 6-port 1000BaseX Ethernet
set module name 2
set module enable 2
set vlan 1 2/1-6
set port enable 2/1-6
set port level 2/1-6 normal
set port trap 2/1-6 disable
set port name 2/1-6
set port security 2/1-6 disable age 0 maximum 1 shutdown 0 violation shutdown
set port membership 2/1-6 static
set port protocol 2/1-6 ip on
set port protocol 2/1-6 ipx auto
set port protocol 2/1-6 group auto
set port negotiation 2/1-6 enable
set port flowcontrol 2/1-6 send desired
set port flowcontrol 2/1-6 receive off
set cdp enable 2/1-6
set udld enable 2/1-6
set udld aggressive-mode disable 2/1-6
set trunk 2/1 auto dot1q 1-1005
set trunk 2/2 auto dot1q 1-1005
set trunk 2/3 auto dot1q 1-1005
set trunk 2/4 auto dot1q 1-1005
set trunk 2/5 auto dot1q 1-1005
set trunk 2/6 auto dot1q 1-1005
set spantree portfast 2/1-6 disable
set spantree portcost 2/1-6 4
set spantree portpri 2/1-6 32
set spantree portvlanpri 2/1 0
set spantree portvlanpri 2/2 0
set spantree portvlanpri 2/3 0
set spantree portvlanpri 2/4 0
set spantree portvlanpri 2/5 0
set spantree portvlanpri 2/6 0
set spantree portvlancost 2/1 cost 3
set spantree portvlancost 2/2 cost 3
set spantree portvlancost 2/3 cost 3
set spantree portvlancost 2/4 cost 3
set spantree portvlancost 2/5 cost 3
set spantree portvlancost 2/6 cost 3
set spantree guard none 2/1-6
set port gvrp 2/1-6 disable
set gvrp registration normal 2/1-6
set gvrp applicant normal 2/1-6
set port gmrp 2/1-6 enable
set gmrp registration normal 2/1-6
set gmrp fwdall disable 2/1-6
set port channel 2/1-6 mode auto silent
!
#module 3 : 34-port Router Switch Card
set module name 3
set module enable 3
set vlan 1 3/3-9,3/16-19,3/26-34
set vlan 20 3/10-15
set vlan 30 3/20-25
set vlan 99 3/1-2
set port auxiliaryvlan 3/1-34 none
set port qos 3/1-34 trust-ext untrusted
set port qos 3/1-34 cos-ext 0
set port enable 3/1-34
set port level 3/1-34 normal
set port speed 3/3-34 auto
set port trap 3/1-34 disable
set port name 3/1-34
set port security 3/1-34 disable age 0 maximum 1 shutdown 0 violation shutdown
set port membership 3/1-34 static
set port protocol 3/1-34 ip on
set port protocol 3/1-34 ipx auto
set port protocol 3/1-34 group auto
set cdp enable 3/1-34
set udld disable 3/3-34
set udld aggressive-mode disable 3/1-34
set trunk 3/1 nonegotiate dot1q 1-1005
set trunk 3/2 nonegotiate dot1q 1-1005
set trunk 3/3 auto dot1q 1-1005
set trunk 3/4 auto dot1q 1-1005
set trunk 3/5 auto dot1q 1-1005
set trunk 3/6 auto dot1q 1-1005
set trunk 3/7 auto dot1q 1-1005
set trunk 3/8 auto dot1q 1-1005
set trunk 3/9 auto dot1q 1-1005
set trunk 3/10 auto dot1q 1-1005
set trunk 3/11 auto dot1q 1-1005
set trunk 3/12 auto dot1q 1-1005
set trunk 3/13 auto dot1q 1-1005
set trunk 3/14 auto dot1q 1-1005
set trunk 3/15 auto dot1q 1-1005
set trunk 3/16 auto dot1q 1-1005
set trunk 3/17 auto dot1q 1-1005
set trunk 3/18 auto dot1q 1-1005
set trunk 3/19 auto dot1q 1-1005
set trunk 3/20 auto dot1q 1-1005
set trunk 3/21 auto dot1q 1-1005
set trunk 3/22 auto dot1q 1-1005
set trunk 3/23 auto dot1q 1-1005
set trunk 3/24 auto dot1q 1-1005
set trunk 3/25 auto dot1q 1-1005
set trunk 3/26 auto dot1q 1-1005
set trunk 3/27 auto dot1q 1-1005
set trunk 3/28 auto dot1q 1-1005
set trunk 3/29 auto dot1q 1-1005
set trunk 3/30 auto dot1q 1-1005
set trunk 3/31 auto dot1q 1-1005
set trunk 3/32 auto dot1q 1-1005
set trunk 3/33 auto dot1q 1-1005
set trunk 3/34 auto dot1q 1-1005
set spantree portfast 3/1-34 disable
set spantree portcost 3/1-2 4
set spantree portcost 3/3-5,3/7-8,3/10-13,3/20-24,3/34 19
set spantree portcost 3/6,3/9,3/14-19,3/25-33 100
set spantree portpri 3/1-34 32
set spantree portvlanpri 3/1 0
set spantree portvlanpri 3/2 0
set spantree portvlanpri 3/3 0
set spantree portvlanpri 3/4 0
set spantree portvlanpri 3/5 0
set spantree portvlanpri 3/6 0
set spantree portvlanpri 3/7 0
set spantree portvlanpri 3/8 0
set spantree portvlanpri 3/9 0
set spantree portvlanpri 3/10 0
set spantree portvlanpri 3/11 0
set spantree portvlanpri 3/12 0
set spantree portvlanpri 3/13 0
set spantree portvlanpri 3/14 0
set spantree portvlanpri 3/15 0
set spantree portvlanpri 3/16 0
set spantree portvlanpri 3/17 0
set spantree portvlanpri 3/18 0
set spantree portvlanpri 3/19 0
set spantree portvlanpri 3/20 0
set spantree portvlanpri 3/21 0
set spantree portvlanpri 3/22 0
set spantree portvlanpri 3/23 0
set spantree portvlanpri 3/24 0
set spantree portvlanpri 3/25 0
set spantree portvlanpri 3/26 0
set spantree portvlanpri 3/27 0
set spantree portvlanpri 3/28 0
set spantree portvlanpri 3/29 0
set spantree portvlanpri 3/30 0
set spantree portvlanpri 3/31 0
set spantree portvlanpri 3/32 0
set spantree portvlanpri 3/33 0
set spantree portvlanpri 3/34 0
set spantree portvlancost 3/1 cost 3
set spantree portvlancost 3/2 cost 3
set spantree portvlancost 3/3 cost 18
set spantree portvlancost 3/4 cost 18
set spantree portvlancost 3/5 cost 18
set spantree portvlancost 3/6 cost 99
set spantree portvlancost 3/7 cost 18
set spantree portvlancost 3/8 cost 18
set spantree portvlancost 3/9 cost 99
set spantree portvlancost 3/10 cost 18
set spantree portvlancost 3/11 cost 18
set spantree portvlancost 3/12 cost 18
set spantree portvlancost 3/13 cost 18
set spantree portvlancost 3/14 cost 99
set spantree portvlancost 3/15 cost 99
set spantree portvlancost 3/16 cost 99
set spantree portvlancost 3/17 cost 99
set spantree portvlancost 3/18 cost 99
set spantree portvlancost 3/19 cost 99
set spantree portvlancost 3/20 cost 18
set spantree portvlancost 3/21 cost 18
set spantree portvlancost 3/22 cost 18
set spantree portvlancost 3/23 cost 18
set spantree portvlancost 3/24 cost 18
set spantree portvlancost 3/25 cost 99
set spantree portvlancost 3/26 cost 99
set spantree portvlancost 3/27 cost 99
set spantree portvlancost 3/28 cost 99
set spantree portvlancost 3/29 cost 99
set spantree portvlancost 3/30 cost 99
set spantree portvlancost 3/31 cost 99
set spantree portvlancost 3/32 cost 99
set spantree portvlancost 3/33 cost 99
set spantree portvlancost 3/34 cost 18
set spantree guard none 3/1-34
set port gvrp 3/1-34 disable
set gvrp registration normal 3/1-34
set gvrp applicant normal 3/1-34
set port gmrp 3/1-34 enable
set gmrp registration normal 3/1-34
set gmrp fwdall disable 3/1-34
set port channel 3/1-2 mode on
set port channel 3/3-34 mode auto silent
!
#module 4 empty
!
#module 5 empty
!
#module 6 empty
!
#switch port analyzer
!
#cam
set cam agingtime 1,10,20,30,99,1003,1005 300
!
#gvrp
set gvrp dynamic-vlan-creation disable
set gvrp disable
!
#authorization
set authorization exec disable console
set authorization exec disable telnet
set authorization enable disable console
set authorization enable disable telnet
set authorization commands disable console
set authorization commands disable telnet
end

[此贴被 perljava(perljava) 在 10月05日17时01分编辑过]

地主发表时间: 04-10-05 16:59

论坛: 编程破解