论坛: 电脑门诊 标题: 电脑自动重启后无法进入系统! 复制本贴地址    
作者: kv3000 [kv3000]    论坛用户   登录
*** STOP:0X00000067(0X00000004,0X00000007,0X00000000,0X00000000)
If this is the first time you ve seen this stop error screen,restart your Computer If this screen appears again,follow
these steps:
Check to make sure any new rardware or software is properly installed If this is a new installation,ask your hardware or software manufacturer for any windows 2000 updates you might need
If problems continue,disableor remove any nesly installed hardware or software disable BIOS memory aptions such as caching or shadowing I fyou need to use safe mode to remove or disable Components restart your computer press F8 to select Advanced startup options and then select safe Mode.
Refer to your Getting started manual for more information on troublesshooting stop errors.
    我的电脑在工作的时候总是会无故的重启,当重启后进入系统时就会出现以上这段话,之后就无法进入系统,键盘也不能用啦,等于死机;能告诉我这是为什么吗?是不是硬盘坏啦!我用光盘启动重装系统也会出现上述信息!

地主 发表时间: 05/28 21:29

回复: beyonds [beyonds]   论坛用户   登录
这可能是硬件兼容性引起的,我以前也遇到过,我的CPU是超频了的,每次安装以后重启就会出现这个错误,不过也不一定是CPU咯也有可能是内存或显卡的兼容性不好,因为2000对硬件的检测是非常严格的,不比98。

B1层 发表时间: 05/28 21:49

回复: kv3000 [kv3000]   论坛用户   登录
谢谢楼上的朋友提出这么宝贵的意见!
但我用WIN2000系统都一年多啦!从来没有出现类似的问题!


B2层 发表时间: 05/28 22:16

回复: neaes [near]   论坛用户   登录
可能是系统配置文件有问题,你有没有备份配置文件?

有的话,可以用起动盘手工恢复一下,看看行不行?


B3层 发表时间: 05/28 23:36

回复: kv3000 [kv3000]   论坛用户   登录
类似的方法我也试过,但每次用光盘启动的时候?上述的信息就会出现!更别说要做些什么啦!

B4层 发表时间: 05/29 22:22

回复: neaes [near]   论坛用户   登录
在bios里可能看到硬盘么,
不能是硬分区表坏了吧!!

B5层 发表时间: 05/29 23:49

回复: thinbug [thinbug31]   论坛用户   登录
内存控制模块已损坏或者是硬盘接线不好,这类问题我以前经常发生,
你试试看接线是否松了。

B6层 发表时间: 05/30 00:09

论坛: 电脑门诊

20CN网络安全小组版权所有
Copyright © 2000-2010 20CN Security Group. All Rights Reserved.
论坛程序编写:NetDemon

粤ICP备05087286号