论坛: 黑客进阶 标题: 网关不给我路由了,怎么办 复制本贴地址    
作者: dodo [janaskiter]    论坛用户   登录
我捣乱来着,可能被学校的网管发现了,他在网关上做了设置,网关便不给我路由数据包了。
靠,我该怎么办?

地主 发表时间: 04-06-26 15:00

回复: dodo [superdodo]   论坛用户   登录
改mac地址

B1层 发表时间: 04-06-26 15:41

回复: snowred [snowred]   论坛用户   登录
楼上的请说明白一点吧
我也想听听 呀~~~

B2层 发表时间: 04-06-26 21:00

回复: www [wish259]   论坛用户   登录
然后改自己 ip,在不用arp欺骗
大家都不上

B3层 发表时间: 04-06-27 00:43

回复: dodo [janaskiter]   论坛用户   登录
可不可以详细的说明一下?
我试过了下面的方法:
找局域网中一台存活的计算机,然后我把自己的ip和mac改成和它一样,然后
disable enable网卡。这样是可以上网了,但是觉得之中必有冲突存在。
请会其它方法的朋友指点我一二。

宿舍中电脑是hub联的网。其它的电脑都可以使用网关,唯独我的电脑不能使用网关。
我估计管理员肯定是用的硬件mac(我估计是网卡ROM里的mac地址)来屏蔽我。那个
网管可真无聊

B4层 发表时间: 04-06-28 17:33

回复: dodo [janaskiter]   论坛用户   登录
补充一下,我可以访问局域网其它的计算机,但就是 网关不给我服务。
可以arp出网关的mac
网关也不为我的虚拟机vmware服务,所以我断定一定是网关识别我的物理mac(是固化在rom里面的吧),我可以改这个物理mac吗?有什么方法呢?


B5层 发表时间: 04-06-28 20:57

回复: www [wish259]   论坛用户   登录


ARP -s inet_addr eth_addr [if_addr]
ARP -d inet_addr [if_addr]
ARP -a [inet_addr] [-N if_addr]

  -a            Displays current ARP entries by interrogating the current
                protocol data.  If inet_addr is specified, the IP and Physical
                addresses for only the specified computer are displayed.  If
                more than one network interface uses ARP, entries for each ARP
                table are displayed.
  -g            Same as -a.
  inet_addr    Specifies an internet address.
  -N if_addr    Displays the ARP entries for the network interface specified
                by if_addr.
  -d            Deletes the host specified by inet_addr. inet_addr may be
                wildcarded with * to delete all hosts.
  -s            Adds the host and associates the Internet address inet_addr
                with the Physical address eth_addr.  The Physical address is
                given as 6 hexadecimal bytes separated by hyphens. The entry
                is permanent.
  eth_addr      Specifies a physical address.
  if_addr      If present, this specifies the Internet address of the
                interface whose address translation table should be modified.
                If not present, the first applicable interface will be used.
Example:
  > arp -s 157.55.85.212  00-aa-00-62-c6-09  .... Adds a static entry.
  > arp -a                                    .... Displays the arp table.



B6层 发表时间: 04-06-28 23:16

回复: xjliuwei [xjliuwei]   论坛用户   登录
.................看了

B7层 发表时间: 04-06-29 10:02

回复: chenji [chenji]   论坛用户   登录
找学校是 老鸟!

B8层 发表时间: 04-06-29 11:06

回复: dodo [janaskiter]   论坛用户   登录
MAC地址是不能在任何操作系统里通过软件修改的
无论在WIN200,LINUX里,说到的修改MAC地址
其实是在你的网卡上添加一次MAC层的封装,在你发出去的所有数据帧中将你的源地址(SA)数据段内容修改为你所更改的MAC地址,这样当数据包被封装好在网络中传输的时候,所有的设备都以为这数据包是从你更改的MAC地址发出来的。但是其实,这时候你网卡的MAC地址没有改变。

真正修改MAC地址的唯一方法就是重新写你的ROM。

完了,网管把我的rom里面的mac地址给屏蔽了,我的机器在学校里面上不了网了。除非我换块网卡或是刷rom芯片。呵呵

B9层 发表时间: 04-06-29 12:37

回复: dodo [janaskiter]   论坛用户   登录
有谁知道刷网卡rom的软件吗?

B10层 发表时间: 04-06-29 12:38

回复: lijingxi [lijingxi]   见习版主   登录
那你换个网卡多简单!  一个网卡才35块  别生气 我实在是想不到好办法了!

B11层 发表时间: 04-06-29 13:07

回复: K9999 [yandsd]   论坛用户   登录
支持

B12层 发表时间: 04-06-30 11:20

回复: BrideX [bridex]   论坛用户   登录
真想帮你。。。

B13层 发表时间: 04-06-30 11:35

回复: ddd [hbfqh_cn]   论坛用户   登录
对,还是换网卡吧!!

B14层 发表时间: 04-07-05 10:26

回复: ghostmm [ghostmm]   论坛用户   登录
换一张网卡

B15层 发表时间: 04-07-05 12:10

回复: wl555 [wl555]   论坛用户   登录
28就买了。

B16层 发表时间: 04-07-06 21:24

回复: happylmy [happylmy]   论坛用户   登录
我这还可有批发的!!!!!!!!!!!!!!!!!

B17层 发表时间: 04-07-08 16:07

回复: yingfox [yingfox]   论坛用户   登录
简单~随便改一个mac就可以了`

B18层 发表时间: 04-07-09 10:14

回复: zc0407 [zc0407]   论坛用户   登录
偶这里最低价25一片  量大从优啊

B19层 发表时间: 04-07-15 19:27

回复: zhongyh [zhongyh]   论坛用户   登录
ARP -s inet_addr eth_addr [if_addr]
ARP -d inet_addr [if_addr]
ARP -a [inet_addr] [-N if_addr]

  -a            Displays current ARP entries by interrogating the current
                protocol data.  If inet_addr is specified, the IP and Physical
                addresses for only the specified computer are displayed.  If
                more than one network interface uses ARP, entries for each ARP
                table are displayed.
  -g            Same as -a.
  inet_addr    Specifies an internet address.
  -N if_addr    Displays the ARP entries for the network interface specified
                by if_addr.
  -d            Deletes the host specified by inet_addr. inet_addr may be
                wildcarded with * to delete all hosts.
  -s            Adds the host and associates the Internet address inet_addr
                with the Physical address eth_addr.  The Physical address is
                given as 6 hexadecimal bytes separated by hyphens. The entry
                is permanent.
  eth_addr      Specifies a physical address.
  if_addr      If present, this specifies the Internet address of the
                interface whose address translation table should be modified.
                If not present, the first applicable interface will be used.
Example:
  > arp -s 157.55.85.212  00-aa-00-62-c6-09  .... Adds a static entry.
  > arp -a                                    .... Displays the arp table.
关于这个谁知道的,告诉我一下好吗?谢谢...

B20层 发表时间: 04-07-15 23:14

回复: kyy31 [kyy31]   论坛用户   登录
看了那么多,都不太明白!!



B21层 发表时间: 04-07-17 09:49

论坛: 黑客进阶

20CN网络安全小组版权所有
Copyright © 2000-2010 20CN Security Group. All Rights Reserved.
论坛程序编写:NetDemon

粤ICP备05087286号